Temporary Safety Mesh Fencing: A Planning Guide for Worksites and Facilities

Temporary works often need a boundary that is visible, easy to adapt and straightforward to remove when the activity ends. Plastic mesh fencing can help separate landscaping, maintenance and controlled work areas from normal circulation. For procurement and facility teams, the key is to define what the boundary must do before choosing the roll length, supports and installation method.

Start with the function of the boundary

Document the area to be marked, the expected duration, nearby pedestrian or vehicle routes and the ground available for supports. A mesh fence can make a temporary boundary clear, but it is not automatically a security fence, traffic restraint, fall-protection system or substitute for controls required by the site's risk assessment. Decide whether the project also needs gates, signs, lighting or a more substantial barrier.

OranLite's 102 cm × 61 m Plastic Safety Barrier Mesh Fence Kit uses green recycled plastic mesh. The current product page lists a 102 cm height and 6096 cm length, and states that the kit includes plastic-coated steel-core stakes and cable ties. The mesh can be cut to the required length and rolled after use for storage.

Measure the route and plan the supports

Measure the full boundary, including corners, returns and planned access points. Note changes in ground condition, slopes, drainage channels and places where underground services may affect stake placement. Stake spacing and fixing details should come from the site plan and local conditions rather than an assumed universal interval.

• What length of boundary is required, including overlaps?
• Where will people or equipment enter the controlled area?
• Can the supplied stakes be used in the actual ground?
• How will the mesh be tensioned without excessive distortion?
• Where will removed sections and unused material be stored?

Installation and site use

Set out the line before cutting the roll. Position supports so the mesh remains visible and does not project into the pedestrian route. Secure the mesh with ties at suitable points, keep cut ends controlled and check that access points follow the site's procedure. If wind, changing ground or adjacent traffic can affect the installation, reassess the setup and use the additional controls identified by the project plan.

Inspection, maintenance and reuse

Inspect the boundary after installation and at intervals appropriate to the site. Look for torn mesh, loose ties, leaning or damaged stakes, sagging sections and changes around corners or access points. Replace damaged components rather than relying on improvised repairs. When the work is complete, remove ties and stakes carefully, clean the mesh as appropriate, roll it without sharp folds and store the kit where it will not be crushed.

Give suppliers a clear brief

Include total route length, ground types, number of corners and access points, expected duration, storage requirements and any separate signage or barrier measures in your enquiry. OranLite can discuss the size and kit contents shown on the product page; final suitability and installation details should be confirmed for the specific site.